Hide empty categories
11 posts by 3 authors in: Forums > CMS Builder
Last Post: February 28, 2011 (RSS)
Hello,
I currently have a page that lists all of my categories in a tree structure.
I would like to modify this so that empty categories (i.e. those with no listings) are hidden.
Could someone please tell me how to go about this?
Thanks,
Greg
I currently have a page that lists all of my categories in a tree structure.
I would like to modify this so that empty categories (i.e. those with no listings) are hidden.
Could someone please tell me how to go about this?
Thanks,
Greg
Re: [gversion] Hide empty categories
Hi Greg,
Here's an excerpt from my CMSB Cookbook http://www.thecmsbcookbook.com that should set you in the right direction.
UNDERSTANDING AND USING IF STATEMENTS
...You can use if statements to test for a particular condition. Say to test whether the field “your_field” is empty:
In a single record viewer:
Or in a multi record viewer:
Hope that gives you a starting point.
If statements are a very powerful tool and there's a lot more information on how to use them to achieve your goals in the Cookbook.
Best,
Jerry Kornbluth
Here's an excerpt from my CMSB Cookbook http://www.thecmsbcookbook.com that should set you in the right direction.
UNDERSTANDING AND USING IF STATEMENTS
...You can use if statements to test for a particular condition. Say to test whether the field “your_field” is empty:
In a single record viewer:
<?php if ($your_tableRecord['your_field']): ?> ...your code...
<?php endif ?>Or in a multi record viewer:
<?php foreach ($your_tableRecords as $record): ?>
<?php if ($record['your_field']): ?> ...your code...
<?php endif ?>
<?php endforeach; ?>Hope that gives you a starting point.
If statements are a very powerful tool and there's a lot more information on how to use them to achieve your goals in the Cookbook.
Best,
Jerry Kornbluth
The first CMS Builder reference book is now available on-line!
Take advantage of a free 3 month trial subscription, only for CMSB users, at: http://www.thecmsbcookbook.com/trial.php
Take advantage of a free 3 month trial subscription, only for CMSB users, at: http://www.thecmsbcookbook.com/trial.php
Re: [gversion] Hide empty categories
By Jason - February 24, 2011
Hi Greg,
I'm assuming that you're storing your categories in one section, and your listings in another. Is that right?
In that case, you'll need to figure out how many listings is in each category before you begin outputting them. If you could provide some more information on your sections (ie, does a listing have only one, or multiple categories? What is the name of the category field in the listings section?) and also attach the .php file you're working with, I can try to give you a more specific example of how to do this.
Hope this helps
I'm assuming that you're storing your categories in one section, and your listings in another. Is that right?
In that case, you'll need to figure out how many listings is in each category before you begin outputting them. If you could provide some more information on your sections (ie, does a listing have only one, or multiple categories? What is the name of the category field in the listings section?) and also attach the .php file you're working with, I can try to give you a more specific example of how to do this.
Hope this helps
---------------------------------------------------
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Re: [Jason] Hide empty categories
Hi Jason,
Yes, that's right - categories in one section and listings in another.
Listings can only be assigned to one category and the category field is a "list" type called "category".
My code is as follows:
I'm really grateful for your help.
Thank you,
Greg
Yes, that's right - categories in one section and listings in another.
Listings can only be assigned to one category and the category field is a "list" type called "category".
My code is as follows:
<?php header('Content-type: text/html; charset=utf-8'); ?>
<?php
// load viewer library
$libraryPath = 'cmsAdmin/lib/viewer_functions.php';
$dirsToCheck = array('/home/sites/oxfordlabs.co.uk/public_html/','','../','../../','../../../');
foreach ($dirsToCheck as $dir) { if (@include_once("$dir$libraryPath")) { break; }}
if (!function_exists('getRecords')) { die("Couldn't load viewer library, check filepath in sourcecode."); }
// load records
list($categoryRecords, $categoryMetaData) = getCategories(array(
'tableName' => 'categories',
));
?>
<?php include "include_header.php"; ?>
<h2>All Categories</h2>
<!-- STEP2: Display Records (Paste this where you want your records to be listed) -->
<ul>
<?php foreach ($categoryRecords as $record): ?>
<?php echo $record['_listItemStart'] ?>
<a href="searchResults.php?categories=<?php echo $record['num'] ?>"><?php echo $record['name'] ?></a>
<?php echo $record['_listItemEnd'] ?>
<?php endforeach; ?>
<?php if (!$categoryRecords): ?>
<li>No records were found!</li>
<?php endif ?>
</ul>
<!-- /STEP2: Display Records -->
<?php include "include_footer.php"; ?>I'm really grateful for your help.
Thank you,
Greg
Re: [gversion] Hide empty categories
By Jason - February 25, 2011
Hi Greg,
In order to do this, there are a couple things we need to do. First, we need to get all of our listings and then figure out how many listings are in each category. We'll use this code under where we select our categories:
NOTE: this example assumes your using the category's num field as the value.
This code creates an array using category numbers as an index and counts up how many listings use each category.
Next, where we're outputting our categories, we can check how many listings that category has. If it doesn't have any, we'll use the "continue" command to skip to the next category:
(change in red)
Hope this helps get you started.
In order to do this, there are a couple things we need to do. First, we need to get all of our listings and then figure out how many listings are in each category. We'll use this code under where we select our categories:
NOTE: this example assumes your using the category's num field as the value.
// get listings records
list( $listingsRecords, $listingsMetaData ) = getRecords(array(
'tableName' => 'listings',
'allowSearch' => false,
));
//talling the number of listings for each category
$categoryNumToListingsCount = array();
foreach($listingsRecords as $listing){
@$categoryNumToListingsCount[ $listing['category'] ] ++;
}This code creates an array using category numbers as an index and counts up how many listings use each category.
Next, where we're outputting our categories, we can check how many listings that category has. If it doesn't have any, we'll use the "continue" command to skip to the next category:
(change in red)
<?php foreach ($categoryRecords as $record): ?>
<?php if(!@$categoryNumToListingsCount [$record['num']]) { continue; } ?>
<?php echo $record['_listItemStart'] ?>
<a href="searchResults.php?categories=<?php echo $record['num'] ?>"><?php echo $record['name'] ?></a>
<?php echo $record['_listItemEnd'] ?>
<?php endforeach; ?>Hope this helps get you started.
---------------------------------------------------
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Re: [Jason] Hide empty categories
Hi Jason,
Thanks very much for your help.
I have inserted the code you suggested and after resolving a small error message, I am now not seeing any categories at all :)
I think it might be something to do with the "num" value you mentioned... I am using the "num" value as the "Record Number".
I have attached the file that I am using for you to take a look at if that's OK.
Thanks again,
Greg
Thanks very much for your help.
I have inserted the code you suggested and after resolving a small error message, I am now not seeing any categories at all :)
I think it might be something to do with the "num" value you mentioned... I am using the "num" value as the "Record Number".
I have attached the file that I am using for you to take a look at if that's OK.
Thanks again,
Greg
Re: [gversion] Hide empty categories
By Jason - February 28, 2011
Hi Greg,
In your listings section, what are you storing as the value of your category field? You would need to use 2 different fields, one for the label (what you see) and one for the value (what is actually stored in the database).
The code example I gave you assumed that you're using the "num" field from the category section as the value for your category list field (in the listing section).
If that's not the case, you'll need to change the code to match how you're storing things in the database.
Confirm how you have your category field set up in the listing section and let me know if you run into any problems.
Hope this helps.
In your listings section, what are you storing as the value of your category field? You would need to use 2 different fields, one for the label (what you see) and one for the value (what is actually stored in the database).
The code example I gave you assumed that you're using the "num" field from the category section as the value for your category list field (in the listing section).
If that's not the case, you'll need to change the code to match how you're storing things in the database.
Confirm how you have your category field set up in the listing section and let me know if you run into any problems.
Hope this helps.
---------------------------------------------------
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Re: [Jason] Hide empty categories
Hi Jason,
Thank you for your message.
I am using "name" as the value of the 'category' field and "breadcrumb" for the label.
I have therefore tried changing "num" to "name" but still not seeing any categories...
Is there another change required somewhere?
Thanks again,
Greg
Thank you for your message.
I am using "name" as the value of the 'category' field and "breadcrumb" for the label.
I have therefore tried changing "num" to "name" but still not seeing any categories...
Is there another change required somewhere?
Thanks again,
Greg
Re: [gversion] Hide empty categories
By Jason - February 28, 2011
Hi Greg,
Even though you've changed the value to "num", those records are still storing "name" as their value in the database. What you'll need to do is go through your records and re-select a category. That way the record will have the "num" stored.
Hope this helps
Even though you've changed the value to "num", those records are still storing "name" as their value in the database. What you'll need to do is go through your records and re-select a category. That way the record will have the "num" stored.
Hope this helps
---------------------------------------------------
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Jason Sauchuk - Project Manager
interactivetools.com
Hire me! Save time by getting our experts to help with your project.
http://www.interactivetools.com/consulting/
Re: [Jason] Hide empty categories
Hi Jason,
Am I right in thinking that we have to use the "num" value as you are counting the number of listings?
I therefore can't just change the code you provided:
to be as follows:
Thanks,
Greg
Am I right in thinking that we have to use the "num" value as you are counting the number of listings?
I therefore can't just change the code you provided:
<?php if(!@$categoryNumToListingsCount [$record['num']]) { continue; } ?>to be as follows:
<?php if(!@$categoryNumToListingsCount [$record['name']]) { continue; } ?>Thanks,
Greg